GhostEye 200M Manual Book page 16

LED Digits Display description
Receiver
LED Digits Display:
Video Indicator:
there are two status of the indicator
1：Red and Yellow light together: RX receives the signal from TX normally,
and HDMI and SDI outputs are working together
2：No light: No output signals via HDMI and SDI ports
Power Indicator:
Light on normally when the network is connected.
Normal/Enhanced Anti-interference Mode Indicator :
Decimal point light is off : normal mode
Decimal point light flashes slowly: enhanced anti-interference mode
Support Full PSF resolution
Support Full PSF resolution
25PSF in = 25 PSF out
29.97PSF=29.97PSF out
30PSF in = 30PSF out
50i in = 50i out
59.94i in = 59.94i out
60i in = 60i out
© 2018 Cine Gears INC. All Rights Reserved.
Channel 1 ~ 9, A, b
HDMI and SDI outputs are enabled together,
Flash slowly when the network is not connected.
23.98P in=23.98P out
24P in=24P out
25P in=25P out
29.97P in=29.97P out
30P in=30P out
13