Table of Contents
Advertisement
PowerMonitor Products Application Guide
PLC-Based/ Studio 5000 Environment
All Rockwell Automation PowerMonitor solutions are designed to fit into an integrated architecture where data is
seamlessly shared with a high-performance programmable automation controller for providing the analysis and control.
For analysis of energy data, Add-on Profiles can be integrated into a controller program through
Studio 5000 Logix Designer®
application to view real-time data. The controllers also provide a common means of
bringing discrete inputs from circuit breakers, switches, and protective relays in the power management system to provide
system control that is based on measured data. Preconfigured graphical interface files ('faceplates') can easily be
integrating into an operator interface application for access to this real-time data in the control room or on a panel-
mounted HMI display.
Faceplate files and PLC sample programs are found in the
Energy Management Accelerator
Toolkit.
18
Rockwell Automation Publication 1400-AT001A-EN-P - September 2018
Advertisement
Table of Contents
