Table of Contents
Advertisement
Installation
7） Before RX nished wireless link with TX, 5 RSSI indicators and VIDEO
indicators are o ; when wireless link is done, RSSI indicators will light rst
and indicate the signal strength. If the receiver detects wireless video normal
internally from air inferface, VIDEO indicator will light. Before that, If SDI or
HDMI video out port of the receiver has HD monitor connected, it will
display an OSD of Link connecting...... as in the gure below.
8) The system will spend 20-30 seconds constructing the link, depending
on link strength and the signal channel condition. When wireless link is
established the RSSI light will illuminate, indicating the current wireless
signal strength, VIDO indicators will light, and the connected HD monitor
will be playing the real-time video and audio.
© 2018 Cine Gears INC. All Rights Reserved.
Installation
6
Advertisement
Table of Contents
