Setup The Device - Aztech WIPC302 User Manual

All manuals and user guides at all-guides.com

Setup the Device

When installing the IP Camera, find an area where there are enough electrical outlets for
the IP Camera, router, the main computer, and your other Ethernet devices.
1. Connect your Aztech WIPC302 into your Modem/Router's Ethernet LAN port with
an Ethernet cable.
2. Make user that your Modem/Router's Internet connection is UP to allow you to
access your IP camera via the Internet.
3. Connect the Power Adapter to your Aztech WIPC302 and plug it into the power
outlet then switch it ON.
4. Connect your computer to the same router wherein Aztech WIPC302 is connected
then launch the WIPC302 utility.
User Manual
Page 13 of 51