Advertisement
CLEANING AND CARE
1.
Use a slightly moist cloth to wipe off the housing of the hand vacuum cleaner, the charging stand
and the accessory parts.
2. Wash the dust cup under running water and dry off it before reassembling it to the vacuum
cleaner.
3. Check the filter regularly. If dirt is present, clean the filter with a small brush and then
wash the filter under running water. Dry it in the open air for 24 hours and re-insert it when it is
completely dry.
USING THE CHARGING STAND
When charging the vacuum cleaner, insert the vacuum cleaner into the charging stand firmly.
The vacuum cleaner should be left on the charging stand while charging.
The vacuum cleaner cannot be operated when being charged.
STORAGE
If you do not intend to use the vacuum cleaner for a long time, clean as described in the part of "CLEANING
AND CARE". Then store the vacuum cleaner and all accessories in a dry, clean place, away from direct
sunlight and heat.
Technical data
Vacuum cleaner
Model no.
Dimensions (overall)
Power supply
Capacity
Voltage
Power consumption
Battery Charger
Model no.
Input voltage
Output voltage
Mains frequency
Output current
Protection class
Battery type
RC16C
420 x 174 x 130 mm
Ni-MH rechargeable battery
1500mAh
12V DC
80W
ZNL-D168020
220-240V~
16.8 V DC
50Hz
200 mA
II
Ni-MH, 1500mAh, 1.2V x 10 cells
Advertisement
