Download Print this page

Emptying The Dust Cup; Removing The Filter - KMART RC16C User Manual

Vacuum cleaner (handheld battery powered)

Advertisement

WARNING: The rechargeable battery inside vacuum cleaner (1500mAh, 1.2V*10 cells Ni-MH
rechargeable battery) can only be charged by the supplied charging stand with a
battery charger (ZNL-D168020). Never use this charger for non-rechargeable battery.
Please follow the instruction "Using the charging stand" to connect the vacuum
cleaner and charging stand.
3. When charging, the charging light is red color. It turns to green color when fully charged.
4. The attachments, small nozzle and crevice tool, can be chosen according to your needs. The small
nozzle is ideal for cleaning dust from corners or gaps and the crevice tool for sucking up liquids.
5. When cleaning liquid spills, the liquid sucked should not exceed "MAX" line on the dust cup. It can
suck in approximately 200ml of liquid.
6. Slide the On/Off switch to "1" position. The vacuum cleaner will start to work.
When finished or pausing during cleaning, slide the On/Off switch to "0" position, this will save battery
power. The maximum continuous running time is approximately 15 minutes when the battery is fully
charged.

EMPTYING THE DUST CUP

To empty the collected dust and debris after use, press down on the dust cup release button and then
remove the dust cup by pulling down and out.
Wash the dust cup if necessary. Place it back onto the handle and click firmly into position.

REMOVING THE FILTER

Pull the filter from the frame directly. You may wash the filter with clean water and put it back into the
frame after drying it thoroughly.
3

Advertisement

loading