Specifications - Sony SLV-KA195CH Operating Instructions Manual

Specifications

System
RF output signal
UHF channels 30 to 39
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN,
phono jack (1) (SLV-KA195)
phono jack (2) (SLV-KF295)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO OUT,
phono jack (1) (SLV-KA195)
phono jack (2) (SLV-KF295)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Microphone input
MIC IN 1/2 (2)
more than 3 kilohms, 1.84 mVrms
General
Power requirements
110 – 240 V AC, 50/60 Hz
Power consumption
12 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 355 x 102 x 283.5 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 3.8 kg
EN
24
Additional Information
Supplied accessories
Remote commander (1)
R6 (Size AA) batteries (2)
Aerial cable (1)
Mains lead (1)
Audio/video cable (3-phono to 3-phono)
(SLV-KF295 only) (1)
Microphone (1)
Plug adaptor
(SLV-KA195ME/ SLV-KF295ME only) (1)
Design and specifications are subject to change
without notice.
SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1)