Table of Contents
Advertisement
Operation (when
recording on this unit)
You can make a copy of a tape
using this unit for recording or
playback. The unit cannot record
TV programmes directly since it
does not have a TV tuner.
Before you start editing
• Turn on your TV and set it to the video channel.
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) unit.
Search for the point to start recording and press P PAUSE.
3
Press r REC on this unit and set it to recording pause.
4
To start editing, press the P PAUSE buttons on both units at the same
time.
To stop editing
Press the p STOP buttons on both units.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on a tape
again, cover the tab hole with adhesive tape.
Auto head cleaner
The unit incorporates the auto head cleaner and cleans the video heads
when a tape is loaded or unloaded. When the effect is not sufficient even
after a tape has been loaded/unloaded several times, use the Sony V-25CL
video head cleaning cassette.
Tips
• To edit more precisely, press the P PAUSE buttons on the units to release pause.
• To cut out unwanted scenes while editing, press P PAUSE on this unit when an
unwanted scene begins. When it ends, press P PAUSE again to resume recording.
Note
• You can record tapes only in SP mode.
SLV-KF295ME/PS/KA195ME/PS
P PAUSE
r REC
Safety tab
21
Additional Operations
3-858-164-11 (1)
EN
Advertisement
Table of Contents
