The Timer; Setting The Clock - Sony CFD-Z500 Operating Instructions (primary manual) Operating Instructions Manual

The Timer

Setting the clock

"--:--" indication appears in the display
until you set the clock.
Tip
The time display
system of this player is
the 12-hour system:
AM12:00 = midnight
PM12:00 = noon
Before you set the clock, connect the power source
(pages 23 - 25).
1
Press and hold CLOCK for 2 seconds until the
hour digits flash.
2
Press TIME SET + or – until you set the current
hour. Then press DISPLAY ENTER.
The minute digits flash. Set the minutes by
pressing TIME SET + or – until the correct minute
is displayed.
3
Press DISPLAY ENTER.
The clock starts from 00 seconds.
CLOCK TIME SET –, +
DISPLAY
ENTER
19
The Timer