Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Green-Go GGO-SI4WR
Summary of Contents for Green-Go GGO-SI4WR
- Page 1 Slim Audio Interface 4-Wire Quick Start Guide...
- Page 2 __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide...
- Page 3 Slim Audio Interface 4-Wire Quick Start Guide The Green-GO Slim Audio Interface 4-Wire can act as a general purpose line in/out device for purposes such as program audio and announcements or as a complete user-based engine with 32 channels and program audio.
-
Page 4: Setup Menu Navigation
Pressing the two buttons on the left-hand side of the screen simultaneously will open the setup menu of the Green-GO Slim Audio 4-Wire Interface. Once in the menu, the button on the top left will act as the selection and confirmation button. The button on the bottom left will take you one step back out of the currently selected option or menu. -
Page 5: User Mode Settings
- see also Priority dim in the Options menu An → Assign group to be handled as Announce Channel Em → Assign group to be handled as Emergency Channel __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide... - Page 6 Threshold → Set the threshold level required for the input signal to be transmitted – editable range is from -45 to -20dB or turned Off. Hold → Fast/Med/Long/XLong In → Line In / 125 Hz to 4 kHz __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide...
-
Page 7: General Options
Cue Mode → Set the cue mode; Normal / Auto / Ignore Output Cue Time → Set the output cue time. Range is 0.5 to 60 seconds or Off. __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide... -
Page 8: User Selection
Latency Connection → Use latency connection Audio Normal / Compressed → Set the Forward Error Correction type used --- / On / Compressed Latency → Save the current Latency Connection setup Save __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide... -
Page 9: Configuration Cloning
Scr bright → Set the brightness of the screen / Range: 0 – 15 LED bright → Set the brightness of the LEDs / Range: Off – 1 – 2 – 3 – 4 – 5 - 6 – Max __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide... -
Page 10: Device Information
To send audio onto the network, enable Auto Talk on one of the 32 channels (normally this would be channel 1). __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide... -
Page 11: Technical Specifications
In all of the previous conditions, disconnect the main plug immediately and call your distributor or technical support! WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide... -
Page 12: Declaration Of Conformity
All signal input- and output connections must be shielded and the shielding must be connected to the ground of the corresponding plug. Gemert, February 16, 2018 ing. Joost van Eenbergen __________________________________________________________________________________ Green-GO Slim Audio Interface 4 Wire – Quick Start Guide...
Need help?
Do you have a question about the GGO-SI4WR and is the answer not in the manual?
Questions and answers