Inserting Batteries - LaserLiner SmartVision-Laser Quick Start Manual

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. There is a possibility of a dangerous
impact on – or interference with – electronic devices.
!
Always turn off all lasers and latch the pendulum in place
before transporting, ON/OFF switch in its „OFF" position!
Green laser technology
fore easily visible line image. Unlike previous generations they
are more temperature-stable and energy efficient.
Furthermore, the human eye has a higher sensitivity to the
wave range of the green laser than the red laser, for example.
This makes the green laser diode appear much brighter than
the red one.
Green lasers, especially in the DLD design, thus offer advantages
with regards to how visible the laser line is under unfavourable
conditions.
1

Inserting batteries

Open the battery compartment
and insert batteries (2 x type AA)
according to the symbols. Be
sure to pay attention to polarity.
Laser modules in DLD design stand for high line
quality as well as a clean and clear and there-
6 times brighter than a typical 630 - 660 nm
laser
SmartVision-Laser
–
+ –
09
EN