Power Control; Auto Power On; Max. Power Saving; Standby Control - Samsung SNOW-1810U User Manual

Power Control

m MENU → System → Power Control → E
Power Control

Auto Power On

Max. Power Saving

Standby Control

Network Standby
Power Button Power On Only
" The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
• Off
Max. Power Saving
Conserve power by turning off PC monitor when PC is not used for certain time.
Off
• Off
On
Standby Control
On
You can set the screen standby mode to be applied when an input signal is received.
Off
• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
The message
• Off
The message
" If the message,
" If
• On
Power-saving mode will activate if no input signals are detected.
/ On
/ On
No Signal will appear if no source device is connected.
No Signal will appear if no input signals are detected.
"No Signal" appears even though a source device is connected, check the cable connection.
No Signal Message is set to Off, the No Signal
In this case, set No Signal Message to On.
message does not appear.
76