Using The Lighting Modes; Using The Aux Input - Acoustic Research AWSF100BK User Manual

Using the Lighting Modes

This wireless speaker offers four levels of built-in
lighting modes you can use with or without the
speaker on or playing.
To cycle through the lighting modes: Press the
Lighting Modes button repeatedly to go through the
following modes:
• flicker is a bright flame lighting effect
• flame is a more subdued flame lighting effect
• pulse matches the flame lighting to the beat of
your music
• white is a solid white light
• off turns off all lighting effects.
To turn lighting off: Press and hold Lighting Modes until the lighting turns off.

Using the AUX input

Use a mini-jack audio cable (not included) to connect
the audio output from your device to the AUX IN
audio input on the speaker's back panel (open
the rubber door to access the jack). The speaker
automatically switches to the AUX IN audio. (For
two-speaker setups, plug into the one whose Power/
Pair light is blinking every 5 seconds.)
To listen to Bluetooth audio again, unplug the cable
from the speaker's AUX IN jack.
Speaker back
9