Jadak HS-1RL User Manual
  1. Manuals
  2. Brands
  3. Jadak Manuals
  4. Barcode Reader
  5. HS-1RL
  6. User manual

Jadak HS-1RL User Manual

Hide thumbs Also See for HS-1RL:
Table of Contents

Advertisement

Quick Links

HS-1RL User Guide
HS-1RL User's Manual
Page i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS-1RL and is the answer not in the manual?

Questions and answers

Related Manuals for Jadak HS-1RL

Summary of Contents for Jadak HS-1RL

  • Page 1 HS-1RL User Guide HS-1RL User’s Manual Page i...
  • Page 2 No part of this product or document may be reproduced in any form by any means without prior written authorization of Novanta Corporation and its licensors, if any. TECHNICAL SUPPORT AND CONTACT INFORMATION Telephone: 315.701.0678 www.JADAKtech.com Email: support@jadaktech.com HS-1RL User’s Manual Page ii...
  • Page 3 Revision History DATE Version Description 05/30/2019 Initial Release Original HS-1RL manual. HS-1RL User’s Manual Page iii...

  • Page 4: Table Of Contents

    JADAK HS-1RL Imager Identification ..................12 Reading Techniques ........................ 13 Interface Settings Connecting the HS-1RL with USB Port ..................14 Interface Options ........................15 USB COM Port Emulation ....................15 USB HID Keyboard Emulation .................... 15 Keyboard Country Layout ....................16 HID Keyboard Rate ......................
  • Page 5 RFID Prefix Block String ..................... 31 RFID Suffix ..........................32 RFID Suffix On/Off ......................32 RFID Suffix Block String ..................... 32 RFID Presentation Mode Switching ..................33 Beeper Sounds ........................33 LED Indicators ......................... 33 HS-1RL User’s Manual Page v...
  • Page 6 Code 11 Minimum and Maximum Length ................41 Code 11 Check Digit ......................42 Code 128 ..........................43 Code 128 Defaults ......................43 Code 128 On/Off ........................ 43 Code 128 Minimum and Maximum Length ................. 43 HS-1RL User’s Manual Page vi...
  • Page 7 EAN-13/JAN 13 Defaults ....................48 EAN-13/JAN 13 On/Off ....................... 48 GS1 DataBar (Formerly RSS-14) .................... 49 GS1 DataBar Limited (Formerly RSS-Limited) ................ 49 GS1 DataBar Expanded (Formerly RSS-Expanded) .............. 49 Interleaved 2 of 5 ........................50 HS-1RL User’s Manual Page vii...
  • Page 8 UPC-E(0) ..........................54 UPC-E(0) Defaults ......................54 UPC-E On/Off ........................55 UPC-E(0) Check Digit ......................55 UPC-E(0) Expanded ModeOn/Off ..................55 UPC-E1 ........................... 56 1D Stacked Symbologies ......................56 PDF417 ........................... 56 PDF417 Defaults ........................ 56 HS-1RL User’s Manual Page viii...
  • Page 9 9 - Product Specifications 10 - Maintenance Repairs ............................ 61 Maintenance ..........................61 Interface Cable ........................62 Replacing the Interface Cable .................... 62 11 - Customer Support Obtaining Technical Assistance or Factory Service ..............63 HS-1RL User’s Manual Page ix...
  • Page 10 Appendix A1-2 Command List and Standard Default Parameters ........... 71 Appendix A1-2 RFID Command List and Standard Default Parameters ........74 Appendix B - AIM IDs ......................75 Appendix C - Sample Bar Codes ..................... 78 Appendix D - ASCII Conversion Chart ..................79 HS-1RL User’s Manual Page x...

  • Page 11: Introduction

    (2D) barcodes, combined with reading Low Frequency (LF or 125 kHz) RFID tags in close distance (10 to 40mm). With a small ergonomic shape, the HS-1RL can be used in a wide variety of applications but is specifically designed for healthcare applications and environments. The HS-1RL has a sealed housing that protects it from day to day debris and spills and is built with medical grade plastics that are compatible with popular medical cleansers and disinfectants.

  • Page 12: Hardware Overview

    2 – Hardware Overview ® JADAK HS-1RL Imager Identification On the bottom of your scanner you will see a label as shown below: Part Number Example Serial Number Serial Number: The serial number format is as follows: YYMMDD-NNN Where: YY = Year...

  • Page 13: Reading Techniques

    If the code being scanned is highly reflective (e.g., laminated), it may be necessary to tilt the code up 15° to 18° to prevent unwanted reflection. HS-1RL User’s Manual Page 13...

  • Page 14: Interface Settings

    Interface Settings Connecting the HS-1RL with USB Port By default, the HS-1RL is configured to communicate in USB HID Keyboard mode. For Windows 10 and Linux operating systems, no additional driver is required when using the device in the default mode. USB devices are automatically detected after plugging in the device. If the automatic detection fails, or for Windows 7 operating systems, follow these steps: 1.

  • Page 15: Interface Options

    USB COM Emulation USB HID Keyboard Emulation HID Keyboard Emulation is the default mode for HS-1RL. If the setting has been changed, scan the following code to program the HS-1RL for USB HID Keyboard mode. Note: The HS-1RL must be power cycled after programming this interface! USB HID Keyboard HS-1RL User’s Manual...

  • Page 16: Keyboard Country Layout

    Keyboard Country Layout When the HS-1RL is set to USB HID Keyboard Emulation, the following commands may be used for programming barcodes to set the specific Keyboard layout for your language. Note: Initially only the United States keyboard layout is supported, please contact technical support before configuring any other keyboard layout options.

  • Page 17: Hid Keyboard Rate

    HID Keyboard Rate If you use the HS-1RL in USB HID Keyboard mode, it’s possible to change the speed of the data output when an RFID tag or barcode is read, akin to someone typing the data faster or slower on a keyboard.
  • Page 18 Keyrate Fast * Keyrate Fastest HS-1RL User’s Manual Page 18...

  • Page 19: Default Options

    Default Settings Scan the following code to revert the unit to its default settings. Note: The HS-1RL must be power cycled after programming this command! Please contact JADAK to program the HS-1RL with unique default settings for your application. Input/Output Settings...

  • Page 20: No Reads

    In order to scan barcodes, you need to ‘trigger’ the HS-1RL. This can be done in various ways. You can activate the HS-1RL by sending the trigger command TRGON serially or by pressing the trigger button on the scanner itself.

  • Page 21: Presentation Mode

    Presentation mode is a hands-free mode of operation in which the imager will automatically trigger on when an object is moved into the field of view. The HS-1RL will not enter low power mode while in Presentation Mode. Use the command below to enable Presentation Mode.

  • Page 22: Trigger Time Out

    Note: Good Read Delay is most effective when in Presentation Mode or when Multiple Symbol Mode is turned on in combination with the other Trigger Modes. Setting examples: * No Good Read delay Good Read delay 0.2 seconds Good Read delay 0.5 seconds Good Read delay 1.0 seconds HS-1RL User’s Manual Page 22...

  • Page 23: Re-Read Delay

    Note: Re-read Delay only works when in Presentation Mode. #DLYRERD 50 #DLYRERD 750 Re-read delay 0.05 seconds * Re-read delay 0.75 seconds Re-read delay 0.6 seconds Re-read delay 1.0 seconds Re-read delay 2.0 seconds Re-read delay 5.0 seconds HS-1RL User’s Manual Page 23...

  • Page 24: Firmware Overview (Utilities)

    3 – Firmware Overview (Utilities) The following commands can tell more about certain aspects of the HS-1RL hand scanner. Show Software Revision Show Revision Time Show Device Serial Number HS-1RL User’s Manual Page 24...

  • Page 25: Data Editing

    Use the following codes to transmit an AIM ID character or a Symbol ID Character. See Appendix B for a chart of all supported barcodes and their corresponding AIM ID characters. Default = Don’t Transmit AIM ID. * Don’t Transmit AIM ID Transmit AIM ID Transmit Symbol ID HS-1RL User’s Manual Page 25...

  • Page 26: Barcode Prefix

    Prefix characters are user-definable data characters that can be sent before scanned data. It’s possible for the HS-1RL to enable and set a specific prefix for all scanned barcode data only. This can help to discern barcode data from RFID data when both are output alternately.

  • Page 27: Barcode Suffix

    Suffix characters are user-definable data characters that can be sent after scanned data. It’s possible for the HS-1RL to enable and set a specific suffix for all scanned barcode data only. Note: This Barcode Suffix will be separate from any set RFID suffixes or general suffixes.

  • Page 28: Rfid

    6 - RFID RFID Overview Besides being able to scan 1D and 2D barcodes, the HS-1RL can also read RFID tags, using LF RFID technology at 125 kHz. RFID Mode On/Off It’s possible to enable or disable the RFID functionality in the HS-1RL.
  • Page 29 CASI-RUSCO, EM4100, 4102, 4200, #EM410EN 1 UNIQUE, ZODIAC Cotag #COTAGEN 1 Deister #DEISTEN 1 EM4050, 4150, 4450, 4550, TITAN #EM415EN 1 (EM4050) FDX-B, EM4105 #ISOFDEN 1 G-Prox #GPROXEN 1 HITAG 2, Miro #HITA2EN 1 #ICT_ENA 1 HS-1RL User’s Manual Page 29...
  • Page 30 IDTECK #IDTECEN 1 ioProx #IOPROEN 1 ISONAS #ISONAEN 1 Keri #KERI_EN 1 Nedap #NEDAPEN 1 Nexwatch #HONEYEN 1 #PAC_ENA 1 Pyramid #PYRAMEN 1 #AT555EN 1 TIRIS/HDX #TIRISEN 1 HS-1RL User’s Manual Page 30...

  • Page 31: Rfid Prefix

    ASCII and it’s not possible to interject a Carriage Return in the middle of the block string. For instance, if you want the prefix to be [RFID], send: PRERBLK [RFID]. Default RFID Prefix Block string is: (R) Example codes: * RFID Prefix Block (R) RFID Prefix Block [RFID] HS-1RL User’s Manual Page 31...

  • Page 32: Rfid Suffix

    Tab symbol (as hex 09) and then ABC (ASCII characters again), send the following: SUFRBLK 123\x09ABC The default RFID Suffix Block string is a Carriage Return (hex ‘0D’). * RFID Suffix Block \x0D HS-1RL User’s Manual Page 32...

  • Page 33: Rfid Presentation Mode Switching

    This can be useful for certain notifications. Five different indicator variations are available in the HS-1RL. Use the command LEDINDC x (where ‘x’ is a value between 0 and 5), to have the HS- 1RL light up one of its LED Indicators in various ways.
  • Page 34 Example codes: HS-1RL User’s Manual Page 34...

  • Page 35: Imaging

    7 - Imaging Imaging Overview The HS-1RL cannot be used to take images with. While this could be very helpful in applications such as patient identity verification, signature capturing, or any other situation where you need to take an image, the internal structure of the HS-1RL doesn’t allow for such transmissions.

  • Page 36: Auto Exposure

    EXPTARG x (where ‘x’ is a value between 48 and 212), or by building a menu command barcode. Default value = 120. HS-1RL User’s Manual Page 36...

  • Page 37: Decode Window (Not Supported In Current Firmware)

    Decode Window Left/Right The Left and Right boundaries for the decode window can be set either by sending the serial command shown under the barcodes below with a value between 0 and 843, or by HS-1RL User’s Manual Page 37...
  • Page 38 Data Matrix code that was offset to the left in the Field of View. Note: This image was taken and transmitted using a regular HS-1 Scanner (non-RFID model). HS-1RL User’s Manual Page 38...

  • Page 39: Symbologies

    Symbologies On code (Enable All). If on the other hand, you want to decode only a particular symbology, scan All Symbologies Off (Disable All) followed by the On/Enable symbol for that particular symbology. Disable All Enable All HS-1RL User’s Manual Page 39...

  • Page 40: Linear Symbologies

    The minimum and maximum length for this barcode can be set either by sending the serial command shown under the barcodes below with a value between 2 and 55, or by building a menu command barcode. Codabar Minimum Length Codabar Maximum Length HS-1RL User’s Manual Page 40...

  • Page 41: Code 11

    The minimum and maximum length for this barcode can be set either by sending the serial command shown under the barcodes below with a value between 1 and 55, or by building a menu command barcode. Code 11 Minimum Length Code 11 Maximum Length HS-1RL User’s Manual Page 41...

  • Page 42: Code 11 Check Digit

    Code 11 Check Digit The HS-1RL may look for a check digit to decide if the code is valid. Code 11 usually has 1 check digit and some codes have 2 check digits. Either option can be chosen to be validated.

  • Page 43: Code 128

    ISBT 128 On/Off ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan the appropriate bar code below to enable or disable ISBT 128. Default = Disabled Enable * Disable HS-1RL User’s Manual Page 43...

  • Page 44: Code 39

    Code 39 Maximum Length Code 39 Full ASCII Conversion Code 39 Full ASCII is a variant of Code 39 that pairs certain characters so it can include the entire ASCII set. Default = Disabled. Enable * Disable HS-1RL User’s Manual Page 44...

  • Page 45: Code 39 Check Digit

    Trioptic Code 39 symbols always contain six characters. To enable or disable Trioptic Code 39, scan the appropriate bar code below. Default = Disabled. Note: You should NOT enable Trioptic Code 39 and Code 39 Full ASCII simultaneously. Enable * Disable HS-1RL User’s Manual Page 45...

  • Page 46: Code 93

    The minimum and maximum length for this barcode can be set either by sending the serial command shown under the barcodes below with a value between 0 and 55, or by building a menu command barcode. Code 93 Minimum Length Code 93 Maximum Length HS-1RL User’s Manual Page 46...

  • Page 47: Composite Code

    1 and 2435, or by building a menu command barcode. Default minimum length = 1. Default maximum length = 2435. Composite Code Minimum Length Composite Code Maximum Length HS-1RL User’s Manual Page 47...

  • Page 48: Ean-8/Jan 8

    EAN-13/JAN 13 EAN-13/JAN 13 Defaults Set the EAN-13 settings to their default configuration with this code. EAN-13/JAN 13 On/Off Scan one of the codes below to enable or disable EAN-13. Default = Enabled. * Enable Disable HS-1RL User’s Manual Page 48...

  • Page 49: Gs1 Databar (Formerly Rss-14)

    Scan one of the codes below to enable or disable GS1 DataBar Limited. Default = Enabled. * Enable Disable GS1 DataBar Expanded (Formerly RSS-Expanded) Scan one of the codes below to enable or disable GS1 DataBar Expanded. Default = Enabled. * Enable Disable HS-1RL User’s Manual Page 49...

  • Page 50: Interleaved 2 Of 5

    The minimum and maximum length for this barcode can be set either by sending the serial command shown under the barcodes below with a value between 2 and 55, or by building a menu command barcode. Interleaved 2 of 5 Minimum Length Interleaved 2 of 5 Maximum Length HS-1RL User’s Manual Page 50...

  • Page 51: Interleaved 2 Of 5 Check Digit

    Set all Matrix 2 of 5 settings to their default configuration with this code. Matrix 2 of 5 On/Off Scan one of the codes below to enable or disable Matrix 2 of 5. Default = Disabled. Enable * Disable HS-1RL User’s Manual Page 51...

  • Page 52: Matrix 2 Of 5 Minimum And Maximum Length

    The minimum and maximum length for this barcode can be set either by sending the serial command shown under the barcodes below with a value between 4 and 48, or by building HS-1RL User’s Manual Page 52...

  • Page 53: Msi Check Digits

    Default = Enable One Check Digit, but don’t transmit. Disable MSI Check Digits * Enable One Check Digit, but don’t Transmit Enable One Check Digit and Transmit Enable Two Check Digits, but don’t Transmit Enable Two Check Digits and Transmit HS-1RL User’s Manual Page 53...

  • Page 54: Upc-A

    The check digit is the last character and is used to verify data integrity. This digit is always checked but it may be chosen whether to transmit it. Default=Transmit * Transmit UPC-A Check Do Not Transmit UPC-A Check UPC-E(0) UPC-E(0) Defaults Set the UPC-E(0) settings to their default configuration with this code. HS-1RL User’s Manual Page 54...

  • Page 55: Upc-E On/Off

    UPC-E(0) Expanded ModeOn/Off UPC-E(0) Expanded Mode expands the UPC-E(0) code to the 12 digit, UPC-A format. Scan one of the codes below to enable or disable UPC-E(0) Expanded Mode. Default = Disabled. Enable * Disable HS-1RL User’s Manual Page 55...

  • Page 56: Upc-E1

    To set the default values for PDF417, scan this code: PDF417 On/Off Scan one of the codes below to enable or disable PDF417. Default = Enabled. * Enable Disable MicroPDF417 MicroPDF417 Defaults To set the default values for Micro PDF417, scan this code: HS-1RL User’s Manual Page 56...

  • Page 57: Micropdf417 On/Off

    MicroPDF417 On/Off Scan one of the codes below to enable or disable Micro PDF417. Default = Disabled. Enable * Disable HS-1RL User’s Manual Page 57...

  • Page 58: 2D Matrix Symbologies

    Data Matrix Defaults To set the default values for Data Matrix, scan this code: Data Matrix On/Off Scan one of the codes below to enable or disable Data Matrix. Default = Enabled. * Enable Disable HS-1RL User’s Manual Page 58...

  • Page 59: 2D Matrix Symbologies

    QR Code Defaults To set the default values for QR Code, scan this code: QR Code On/Off Scan one of the codes below to enable or disable QR Code. Default = Enabled. * Enable Disable HS-1RL User’s Manual Page 59...

  • Page 60: Product Specifications

    Sani-Cloth® HB, Sani-Cloth® Plus, Super Sani-Cloth®, Isopropyl Alcohol Wipes Recommended (70%), Cavi-Wipes, Betadine®, 409®, Windex® Blue, Hydrogen Peroxide (3%), Cleaning Solutions: Clorox® Bleach, gentle dish soap and water All specifications subject to change without notice. HS-1RL User’s Manual Page 60...

  • Page 61: Maintenance

    Cleaning the Scanner Housing The HS-1RL is IP54 rated when the cable is attached. This means that liquids and dusts will not penetrate into the housing, however, the scanner should not be submerged in water or other liquids.

  • Page 62: Interface Cable

    Should the cable be damaged, the cable can be replaced in the field. Note: The use of non-JADAK cables voids the warranty, only a JADAK cable can be used to keep the IP54 rating.

  • Page 63: 11 - Customer Support

    JADAK provides assistance and service for all its products. To obtain warranty or non-warranty service, return the unit to JADAK (postage paid) with a copy of the dated purchase record attached. Contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product.

  • Page 64: Limited Warranty

    This includes but is not limited to: cables, power supplies, cradles, and docking stations. JADAK extends these warranties only to the first end users of the products. These warranties are non-transferable. The duration of the limited warranty for the HS-1RL is for one (1) year. HS-1RL User’s Manual...

  • Page 65: Compliance And Ip Notices

    Compliance and IP Notices Statement of Agency Compliance Model Number: HS-1RL FCC ID: QV5HS1RL IC: 5407A-HS1RL EU: CE The product is designed to support the following regulatory and safety standards as a standalone unit. The end user will need to verify general EMC compliance as implemented in their host system.
  • Page 66 L'appareil ne doit pas être co-localisé ou utilisé en conjonction avec une autre antenne ou un autre émetteur. Responsible Party: Novanta Address: 125 Middlesex Turnpike, Bedford, MA 01730, USA Internet Contact Information: www.novanta.com HS-1RL User’s Manual Page 66...
  • Page 67 HS-1RL User’s Manual Page 67...

  • Page 68: Appendices

    Appendices Appendix A - Command Format The HS-1RL accepts a wide range of configuration commands. Commands can be sent to the imager wither by scanning menu bar symbol or via Serial commands sent from the host machine. The HS-1RL command format is.
  • Page 69 Query Goal: What is the range of possible values for the Code 128 Max Length? Send: #128MAXL *[CR] Response: #0-55[CR] Query Goal: What is the default value for the Code 128 Max Length? Send: #128MAXL ^[CR] Response: #55[CR] HS-1RL User’s Manual Page 69...
  • Page 70 #C11MAXL Code 11 Max Symbol Length 1-55 #C11MINL Code 11 Min Symbol Length 1-55 #C93DEFA Default Code 93 Parameters #C93ENAB Enable Decoding Code 93 #C93MAXL Max Code 93 Symbol Length 0-55 #C93MINL Min Code 93 Symbol Length 0-55 HS-1RL User’s Manual Page 70...

  • Page 71: Appendix A1-2 Command List And Standard Default Parameters

    Restore All Settings To Factory Defaults DEFAULT Restore All Settings To Custom Defaults DEVSERN Show Device Serial Number DLYGDRD 0 to 30000 Good Read Delay (in milliseconds) DLYRERD 0 to 30000 Re-read Delay (in milliseconds) DMXDEFA Default Data Matrix Parameters HS-1RL User’s Manual Page 71...
  • Page 72 Max MSI Symbol Length MSIMINL 4 to 48 Min MSI Symbol Length MULTSYM 0 to 1 Multiple Symbol mode NO_READ 0 to 1 Enable No Read message PDFDEFA Default PDF417 parameters PDFENAB 0 to 1 Enable Decoding PDF417 HS-1RL User’s Manual Page 72...
  • Page 73 Set Left boundary of decode window WINDECR 0 to 843 Set Right boundary of decode window WINDECT 0 to 639 Set Top boundary of decode window XMITCID 0 to 2 Transmit Code ID (0-Off, 1-AIM ID, 2-Symbol ID ) HS-1RL User’s Manual Page 73...

  • Page 74: Appendix A1-2 Rfid Command List And Standard Default Parameters

    [CR] RFID Suffix SUFRENA 0 to 1 Enable RFID Suffix UIDONLY 0 to 1 Output the UID of an RFID tag only VIBENAB 0 to 1 Enable Vibration VIBRATE 0 to 2 Vibration Indicator 0-2 HS-1RL User’s Manual Page 74...

  • Page 75: Appendix B - Aim Ids

    3 Combined data packet comprising 13 digits from EAN-13, UPC-A or UPC-E symbol and 2 or 5 digits from supplemental symbol. 4 EAN-8 data packet. Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905 Barcode AIM ID AIM ID Modifiers HS-1RL User’s Manual Page 75...
  • Page 76 908-909. 5 The bar code contains a GS1-128 symbol, and the first codeword is in the range 910-911. Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is transmitted as ]L2ABCD. HS-1RL User’s Manual Page 76...
  • Page 77 ]X0123456789X Chinese 2 of 5, Matrix 2 of 5, Korean 3 of 5, US Postnet, US Planet, UK Postal, Japan Postal, Australia Post, Netherlands KIX Code, USPS 4CB/One Code/ Intelligent Mail, UPU FICS Postal HS-1RL User’s Manual Page 77...

  • Page 78: Appendix C - Sample Bar Codes

    Appendix C - Sample Bar Codes UPC-A Codabar Code 128 Code 39 Code 93 Interleaved 2 of 5 PDF-417 Composite Code MicroPDF Aztec Data Matrix QR Code MaxiCode HS-1RL User’s Manual Page 78...

  • Page 79: Appendix D - Ascii Conversion Chart

    For these Imager engines, use the 2-digit Hex values to create an ASCII character. E.g., to create an F, use ‘46’ and to create an f, use ‘66’. The first 32 characters are unprintable. Char Char Char Char Space “ & ‘ < > HS-1RL User’s Manual Page 79...
  • Page 80 · × ÷ ˜ ¸ Ø ø ™ ¹ Ù ù Š º Ú ú › » Û û œ ¼ Ü ü □ ½ Ý ý Ž ¾ Þ þ Ÿ ¿ ß ÿ HS-1RL User’s Manual Page 80...
  • Page 81 JADAK HS-1RL UM 5/30/2019...

Table of Contents