Samsung DW80R9950 Series User Manual page 49

Problem
Does not dry
dishes well.
DW9900R_DD68-00209A-00_EN.indd 49
Possible cause
There is no rinse aid
in the dispenser or not
enough rinse aid was
used.
The temperature of the
water is low when the
dishwasher is running.
Too many dishes have
been loaded.
Glasses and cups with
concave bottoms hold
water. This water may
spill onto other items
when you unload.
Auto Release™ is turned
off.
Multiple detergent tablets
were used without
selecting the Sanitize
option.
Solution
• Check the dispenser and add rinse aid.
• Use a liquid type rinse aid.
• Check the rinse aid settings.
• Connect the water supply line to a hot
water supply.
• Use rinse aid with the Sanitize option.
• Proper loading of items can affect
drying.
• Load your dishes as recommended.
(See page 21.)
• After finishing the cycle, empty the
lower rack first and then the upper
rack. This will prevent water dripping
from the upper rack onto the dishes in
the lower rack.
• Turn Auto Release™ Dry on. Press the
Lower + Hi-Temp Wash button for 3
seconds to access the Auto Release™
menu. Select "A1" to activate Auto
Release™ Dry.
• Select the Sanitize option or use rinse
aid.
English 49
12/26/2018 11:37:04 AM