Settings; Sound; Auto Release - Samsung DW80R9950 Series User Manual

Operations

Settings

You can change the sound or Auto Release
settings, press the Sanitize and Delay Start buttons simultaneously for 3 seconds. Press
Sanitize to navigate through the sub menus, and then press Delay Start to confirm your
changes.

Sound

U1/U0
Sound
Press Sanitize until 'U1' or 'U0' is displayed. To mute the dishwasher, select 'U0', and then
press Delay Start. To unmute, select 'U1', and then press Delay Start.

Auto Release™

The Auto Release™ Dry function, which is designed to improve drying performance,
automatically opens the dishwasher's door 5 to 15 minutes before a cycle ends.
You can enable or disable Auto Release™ Dry in two ways: Using the Setting Mode or
using the toggle keys. Both methods are described starting below.
NOTE
• Once the door opens on the Auto Release™ Dry mode, the door cannot be closed
manually for the next 2 minutes.
• Disabling (A0) "Auto Release™ Dry" can affect the drying results. Enable (A1) "Auto
Release™ Dry" for better drying result.
• After a cycle is complete, the door automatically opens to let steam out. This is normal
and not a product malfunction.
36 English
DW9900R_DD68-00209A-00_EN.indd 36
settings to your preference. To change the
TM
Auto Release™
A1/A0
Press Sanitize until "A1" or "A0" is
displayed. Then, press Delay Start to
enable (A1) or disable (A0) Auto Release™
Dry.
Using the Toggle Keys :
Press the Lower + Hi-Temp Wash button
for 3 seconds to enable (A1) or disable (A0)
Auto Release™ Dry.
12/26/2018 11:36:58 AM