Table of Contents
Advertisement
6 Pole Magnet
Clamper
Screw
31m/m
4-3-7 White Balance Adjustment
Samsung Electronics
4 Pole Magnet
2 Pole Magnet
Fig. 4-2 Convergence Magnet Assembly
Fig. 4-3 Center Convergence Adjustment
1
2
Fig. 4-4
2 POLE
PURITY
Vertical Green Belt
(a) Set up
1. Warm up the TV for at least 30 minutes in the
Aging Mode(Test Pattern). This mode is
displayed by entering the following sequence:
DISPLAY→FACTORY (Select Test Pattern)
2. Input a Toshiba pattern.
(b) High-Light Adjustment
1. Set SCT to 50 fL in the Factory Service
Mode using CA100. (See Fig. 4-4 )
(c) Low-Light Adjustment
1. Set SBT to 1.2 fL in the Factory Service Mode
using CA100. (See Fig. 4-4
Alignment and Adjustments
YOKE
CLAMP
SCREW
6 POLE
CONVERGENCE
4 POLE
CONVERGENCE
)
4-9
Advertisement
Table of Contents
