Joovv Mobile Stand User Manual page 5

FIG. A
FIG. B
For Use with the Joovv Quad, Max, and Elite
STEP 1
Lay out the included parts on a padded surface, such
as carpet or a blanket, as shown in Figure A.
STEP 2
Insert the H-frame into the left and right base legs.
Make sure the upper connection holes in the H-frame
face the front of the stand (the side with the longer
base legs). Secure using the six (6) provided
M8x14mm screws and washers, as shown in
Figure B. There is one on the inside, one on the back,
and one on the underside of each base leg.
1