SSANGYONG ACTYON 2006.03 Manual page 197

06-4
1533-01
1. LAYOUT AND OVERVIEW
1) Lubrication System
Oil dipstick
gauge
The first separation will happen when blowby
gas passes through baffle plates in cylinder
head cover. Then oil and gas will be separated
due to cyclone effect after entering the oil
separator inlet port. Separated oil returns to oil
pan via oil drain port and the gas will be burnt
again after entering the combustion chamber
through air duct hose via PCV valve that
opens/closes due to pressure differences
between the intake side and crankcase.
LUBRICATION SYSTEM
ACTYON 2006.03
PCV Oil Separator
Cylinder head cover (oil + gas)
Inlet port
Blow-by gas
(air duct hose)
Oil (oil
gauge pipe)