Advertisement
Moog Components Group
VIDEO 3 Input/Output Boards
February 24, 2009
PCB Revision B/Assembly Revision A-B Corrected PCB layout and component value
errors.
PCB Revision B/Assembly Revision C Currently in production.
1.2 Video 3 Board Dash (-) Number Definitions:
The Video 3 board has a Dash Number appended to the part number. This Dash Number
identifies the specific board configurations:
Video 3 Input boards:
-001 standard configuration with SMB video connectors
-002 not released
-003 RGB version, 3 video channels only
-004 4 channel side-scan sonar version
-005 multimode, single board video 3 with 4 x video channels
-006 special video inputs on all 4 channels
-007 analog/4 channel sonar
-008 single board video, 4 x video channels
-009 custom 4 x video channels with video transient suppression
-010 custom 8 MHZ video bandwidth on all channels
-011 4 x analog channels
-012 1 x pseudo-video channel on a single backplane bit
-013 2 x video channels
-014 3 x video channels
-015 Ch1 and 2 video, Ch3 and 4 analog
-016 1 x RGB (3 video channels), 1 x Composite (1 video channel)
-017 1 x video channel + 3 x analog channels
-018 4 x hydrophone channels on single backplane bit
-019 single board video, 4 x video channels with video transient suppression
Video 3 Output boards:
-001 standard configuration with SMB video connectors
-002 not released
-003 RGB version, 3 video channels only
-004 4 channel side-scan sonar version
-005 multimode, single board video 3 with 4 x video channels
-006 analog/4 channel sonar
-007 custom 8 MHZ video bandwidth on all channels
-011 4 x analog channels
-012 1 x pseudo-video channel on single backplane bit
-013 2 x video channels
-014 3 x video channels
-015 Ch1 and 2 Video, Ch3 and 4 Analog
-016 1 x RGB (3 video channels), 1 x Composite (1 video channel)
-017 1 x video channel + 3 x analog channels
-018 4 x hydrophone channels on single backplane bit
Page 4 of 7
Advertisement
