St5: Steinel Products In The "Removal Process" View - Smart Friends Box Installation Instructions Manual

Installation instructions

ST5: STEINEL products in the "Removal process" view

ST5.1
Select the minus symbol to switch to the
"Removal" process.
ST5.3
L810 LED iHF Z Wave and RS LED D2 Z Wave can
be removed by simply clicking on the SET button.
91
Tip: If you want to install a
device in a different location,
you need to remove it. The
device can only be set up in
a different location once the
removal process has been
completed.
ST5.2
Depending on the type of device you have, there are two
different ways of removing devices. XLED Home 2 Z Wave
and IS 140-2 Z Wave are removed using a control dial (Poti).
ST5.4
You will receive confirmation when the device
has been removed successfully.
To do this, turn the control
dial from 0 to SET and back
again within five seconds.
The device can now be set
up in a different location.