Digital system telephon ST 25
Conditions for use ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
The digital system telephone ST 25 is intended for connection to an internal ISDN bus of an
AGFEO ISDN telecommunications system.
You can connect the digital system telephone ST 25 to the following AGFEO ISDN
telecommunications system:
- ISDN telecommunications systems in the AGFEO Basic-Line AS 141, AS 191, software version
2.x or higher
- ISDN telecommunications systems in the AGFEO Basic-Line AS 141 plus, AS 191 plus,
software version 1.x or higher
- ISDN telecommunications systems in the AGFEO Business-Line AS 32, AS 33, AS 34, software
3.x or higher
- ISDN telecommunications systems in the AGFEO Profi-Line AS 40, software version 2.x or
higher
The digital system telephone ST 25 must not be connected to an ISDN interface of a
public telecommunications network.
AGFEO GmbH & CO. KG cannot be held liable for damage resulting from use of the digital
system telephone ST 25 that is not in accordance with its intended purpose.
Safety notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
-
During a thunderstorm, you must not connect or disconnect the digital system
telephone's connecting lead.
-
Lay the digital system telephone's connecting lead in such a way that no-one can
step on it or stumble over it.
-
Make sure that no liquids penetrate into the interior of the digital system telephone.
This may result in short-circuits.
Telekommunikation
1