Commissioning The AGFEO DECT 50 ........................6 Insert Battery ..........................7 Using the DECT 50 for the first time ..................7 DECT 50 Switch On / Off ......................8 Register DECT 50 to an AGFEO DECT-S0-Base plus ..............8 Base Settings Display Area of DECT 50 ......................
Page 4
Delete Base ..........................34 Automatic Keypad Lock ......................35 Automatic Call Answering ......................35 Automatic Call Answering on Removal of DECT 50 from Charging Cradle ....... 36 Do Not Disturb (DND) ........................ 36 Programming Function Buttons ....................37 Recall Function / Function Key ....................38 Function Buttons - available programmable Functions (Overview) ...........
AGFEO products a child's play! User Instructions The AGFEO DECT 50 is designed in connection with an AGFEO DECT-S0 Base plus to be operated on an AGFEO ISDN Telephone System. The AGFEO DECT-S0-Base plus must have a firmware version of 3.0 or higher.
DECT 50 The AGFEO DECT 50 Headset Connection AGFEO DECT 50 Volume Control Display Softkey Right Softkey Left Changes pending Changes pending on Mode of Operation on Mode of Operation Recall Button to Pick Up / Hang Up Abort Programming...
Remove the protection film from the display and insert the handset into the charging cradle to charge the batteries. The charging symbol will be shown in the display to indicate that the DECT 50 is now being charged. Once the batteries are completely charged the charging symbol will change to green.
Register DECT 50 to an AGFEO DECT-S0-Base plus Please follow the instruction below to register the DECT 50 to a Base Station: Ensure that the handset to be registered in close proximity of the base unit. Activate the registration mode as described in the user manual of your DECT S0-Base plus. Afterwards...
This will display the time & date, extension number - and extension name of the DECT 50. If the DECT 50 is paired with another phone then it will also display which telephone has been paired with the DECT 50.
- There are more than 9 symbols switched on. - The function which will be indicated by this symbol is not programmed for your DECT 50 (such as Diversion or Call Filter)! TIP: You may also set these symbols via TK-Suite Set. To do so go to "Phone Settings/System...
DECT 50 Symbols If you click on "Menu" you can scroll through the various features and if so required switch these on, off or undo them. The symbol selected by the navigation button will be highlighted. The following pages will give an overview of the features depicted by the various symbols.
Symbol Switching the Answering Machine of your ST 40 on or off. This will only be possible if the DECT 50 is paired to an ST 40 with answering machine module. Programming and switching of Appointment Reminder Calls. Enable/Disable Call Filter. This feature allows you to carry out a preset action on receiving calls from a specific- or withheld telephone number.
Night service is enabled Night service is only for all lines for which enanbled for some your DECT 50 is lines. authorised to use. Withhold own number enabled All Answering machine Answering machine...
DECT 50 Ringer Sound You may select one of 10 different Ring Tones: Menu Press briefly => => Change AGFEO DECT 50 "Phone Settings" Menu 1 System Features 2 Phone Settings 3 Buttons/Ext Name AGFEO DECT 50 Phone Settings "Ringer Sound"...
DECT 50 Setting Handsfree Volume The handsfree volume of your DECT 50 has a 7 step adjustment: Menu Press briefly => => Change DECT 50 AGFEO "Phone Settings" Menu 1 System Features 2 Phone Settings 3 Buttons/Ext Name AGFEO DECT 50 Phone Settings "AcousticSettings"...
DECT 50 Handset Volume The handset volume of your DECT 50 has a 5 step adjustment: Menu Press briefly Change => => AGFEO DECT 50 "Phone Settings" Menu 1 System Features 2 Phone Settings 3 Buttons/Ext Name AGFEO DECT 50 Phone Settings "AcousticSettings"...
DECT 50 Handsfree Microphone Settings The sensitivity of the handsfree microphone of your DECT 50 has a 5 step adjustment: Menu Press briefly Change => => AGFEO DECT 50 "Phone Settings" Menu 1 System Features 2 Phone Settings 3 Buttons/Ext Name...
DECT 50 Handset Microphone Settings The sensitivity of the handset microphone of your DECT 50 has a 5 step adjustment: Menu Press briefly Change => => AGFEO DECT 50 "Phone Settings" Menu 1 System Features 2 Phone Settings 3 Buttons/Ext Name...
Select extension: Switch on or off as required 2 Extension Keypad Lock On / Off You can lock the keypad of your DECT 50 in order not to press any buttons accidentally. Press and hold the „*“button until a key symbol will be...
DECT 50 Redialling The handset will store 10 of the last numbers called. Press the top of the navigation button. The last dialled telephone numbers will be displayed. AGFEO DECT 50 Redial 05221447090 Select the required phone number by using the 11830 navigation button.
DECT 50 Call Log Missed calls will be logged if the call log is enabled for your extension within the telephone system. A green envelope shown in the upper display area means that there are new missed calls in the call log. The envelope will change to white if information on missed calls have been displayed but not yet deleted.
DECT 50 Store Phone Number from Call Log to System Phone Book Open call log AGFEO DECT 50 Call Log Select the required telephone number by pressing the Entry 2/10 navigation button to the right or left. 0521447090 08:45 Di 09.09.2008 1 Times on external Press the bottom of the navigation button.
DECT 50 Call History The call log history will store the last 1000 incoming and outgoing calls made. If 1000 entries are exceeded, then the oldest entry will be overwritten in order to store the newest 1000 entries. A reset of the telephone system will delete the call history.
The handset volume can be adjusted during a call in progress on AGFEO DECT 50 the side of the DECT 50. This setting will only be applicable to the call currently in progress. Handsfree You may switch to handsfree mode during a call. To do...
Using this telephone phone book will not affect the telephone book of the telephone system. Enter Name Only use the numeric buttons to enter a name. NOTE: This table is only valid for the internal phone book of the DECT 50 handset. Taste & ¿...
DECT 50 Find Entry Press the bottom of the navigation button for a minimum of 2 seconds. AGFEO DECT 50 Phone Book Select Using the navigation button choose "Find Entry" Find Entry and press "Select". New Entry Edit Entry Select the required entry by using the...
DECT 50 Edit Entry Press the bottom of the navigation button for a minimum of 2 seconds. AGFEO DECT 50 Phone Book Select Using the navigation button choose "Edit Entry" Find Entry New Entry and press "Select". Edit Entry Select the required entry by using the Select navigation button.
DECT 50 Change Mode of Retrieval Press briefly the bottom of the navigation button. DECT 50 AGFEO A..Z Mode Press"Mode" Information AGFEO DECT 50 Select the required mode of retrieval by PB Search using the navigation button 1 Index Search and press "OK".
DECT 50 Retrieve Phone Number from System Phone Book (Alphabetical) Press briefly the bottom of the navigation button. AGFEO DECT 50 Enter the first character required, i.e. A=2. A..Z The first entry with the required first letter will be displayed.
- Automatic call answering on retrieval of handset from charging cradle - Idle Mode - Function button programming - Pairing Select Base Should your DECT 50 be registered to more than one base, then you can select which base should be used. Menu Press for 2 seconds AGFEO...
DECT 50 Delete Base To delete a base from your DECT 50 follow the instruction below: Menu Press for 2 seconds DECT 50 Select AGFEO "Setup" Menu Status Phone Book Setup DECT 50 AGFEO Setup Select Configuration "Base Station" Base Station...
Auto Answer Select feature by pressing "Select" Charging Cradle Automatic Call Answering Your DECT 50 can answer a call automatically after the first ring. To use this feature please follow the instruction below: Menu Press for 2 seconds AGFEO DECT 50...
Automatic Call Answering on Removal of DECT 50 from Charging Cradle In default your DECT 50 is set to answer a call once your DECT 50 is removed from the charging cradle. You may disable this function by following the instruction below:...
DECT 50 Programming Function Buttons You may program the 10 function buttons of your DECT 50 with functions of the telephone system. In default the buttons a programmed as follows: Digit Function Internal Announcement Call Waiting Appointment Dest Memory Call Filter...
DECT 50 Recall Function / Function Key You can make use of the function buttons in two ways. 1. Directly from an idle display: Press for 2 seconds the numeric button which has been programmed with the required function. The function will be called.
DECT 50 Function Buttons - available programmable Functions (Overview) TAM activation To switch the answering machine of the System Phone ST 40 AB on or off. Reject Reject a call currently ringing. Caller will hear busy tone (program depending). Call Waiting...
DECT 50 Function Buttons - available programmable Functions (Overview) Switch LCR (Least Cost Routing) on/off for your system phone. Multifunction Enable/Disable time controlled functions of the telephone system (i. e. day- / night service, diversions, relays) Special function button may be assigned:...
By using the pairing function the ST 40 and DECT 50 are treated as one telephone. Dial a number on your ST 40 and continue the call on your DECT 50 or vice versa. Broker between the telephones by just lifting the handset. The call can be simply continued on the other phone.
DECT 50 Important Information regarding Pairing Function - The DECT 50 will also display the set/enabled features of the ST 40 once the handsets have been paired. Exceptions: EIB objects, relays and sensors will NOT be displayed. These functions may be programmed separately for the DECT 50.
DECT 50 Display Software Version Display the current software version of your DECT 50: Menu Press for 2 seconds Select AGFEO DECT 50 "Status" Menu Status Phone Book Setup AGFEO DECT 50 Status Select Software Version "Software Version" Metering Mode...
Page 44
With this you will participate in the reuse of material and valorisation of disused electric- and electronic apparatus, which otherwise could be a health hazard and be negative to the environment. AGFEO GmbH & Co. KG Gaswerkstr. 8 Identnr. 1102263...