Playing Tracks Repeatedly; Repeat Play; Playing Tracks In Random Order; Shuffle Play - Sony XR-C6210R Operating Instructions Manual

Playing tracks repeatedly

— Repeat Play

You can select:
• REP-1 – to repeat a track.
• REP-2 – to repeat a disc.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"REP" appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z REP-1
REP-OFF Z
Repeat Play starts.
3
Press (SHIFT).
To return to normal playback mode, select
"REP-OFF" in step 2 above.
Playing tracks in random
order

— Shuffle Play

You can select:
• SHUF-1 – to play the tracks on the current
disc in random order.
• SHUF-2 – to play the tracks in the current
unit in random order.
• SHUF-ALL – to play all the tracks in all the
units in random order.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"SHUF" appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z SHUF-1
SHUF-OFF Z
Shuffle Play starts.
3
Press (SHIFT).
To return to normal playback mode, select
"SHUF-OFF" in step 2 above.
z REP-2
z SHUF-2
SHUF-ALL Z

Labelling a CD

(For a CD unit with the custom file function)
You can labell each disc with a personalized
name. You can enter up to eight characters for
a disc. If you labell a CD, you can locate the
disc by name and select specific tracks for
playback (page 21).
1
Play the CD and press (PTY/LIST) for two
seconds.
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial counterclockwise,
the characters will appear in reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (PTY/LIST) for two seconds.
Tip
To erase or correct a name, enter "_" (under-bar)
for each character.

— Disc Memo

19