Garmin 400 Series Pilot's Manual page 19

NOTE: Proximity Advisories (PA) are displayed as
solid white diamonds. SKYWATCH shows these
PAs as hollow diamonds since the SKYWATCH
display is monochrome. PAs are defined as traffic
within the 4.0-nm range, within ± 1200 ft. of
altitude separation, and are not a traffic advisory
(TA).
The traffic label is the altitude separation above or
below the symbol and the vertical speed sense arrow to
the right of the symbol (Figure 3-6).
Figure 3-6 Traffic Label
From the Map Page, traffic in a thumbnail format can
be displayed in any of the top three data fields (top four
fields on the 500 Series) on the right side of the Map Page
(Figure 3-8).
When a Traffic Advisory is active, the "Traffic" banner
is displayed in the lower right corner of the Map Page
(Figure 3-7)
Figure 3-7 Traffic Banner
190-00140-10 Rev. E
Displaying Thumbnail Traffic on the Map
Page
Turn the small right knob to select the Map
1)
Page.
2) Press the MENU Key to display the Page
Menu.
Turn the small right knob to select 'Change
3)
Fields?'.
4) Press the ENT Key.
Turn the large right knob to select one of the
5)
top three fields (top four fields on the 500
Series).
6) Turn the small right knob to select 'TRFC' from
the Select Field Type List.
Press the ENT Key. (Figure 3-8)
7)
NOTE: The thumbnail range defaults to 6 nm and
cannot be changed.
400/500 Series Display Interfaces
SKYWATCH INTERFACE
Figure 3-8 Thumbnail Traffic on Map Page
SECTION 3
3-5