Cd/Md Changer; Playing A Cd/Md - Sony XR-C440RDS Operating Instructions Manual

Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons once more.
Note
If you connect an optional power amplifier and do not use
the built-in amplifier, the beep tone will be disabled.
Changing the illumination color
Press (1) while pressing (SEL).
You can choose the color between amber and
green.
EN
14
With Optional Equipment

CD/MD Changer

You can control up to five CD/MD changers
with this unit.

Playing a CD/MD

Press (SOURCE) until the desired
changer indication appears on the
display.
CD/MD playback starts.
When a CD/MD changer is connected, all the
tracks play from the beginning.
Note
Even if you select an MD changer, "CD" appears in the
display.
Selecting CD/MD changers (when
several CD/MD changers are
connected)
Press (MODE) repeatedly to select the desired
CD/MD changer.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
Elapsed playback time
Disc name (XR-C540RDS only)*
Clock
* If you have not labeled CD, "NO NAME" appears in
the display.
If the disc name of an MD is not prerecorded "NO
NAME" appears in the display.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip the tracks.
SEEK
AMS
To locate the
preceding tracks
$
$
$
To locate the
succeeding tracks