Playing Tracks In Random Order; Shuffle Play; Labeling A Cd; Disc Memo - Sony XR-C457 Operating Instructions Manual

To repeat all the discs in the
current changer
Press (2) repeatedly during CD/MD
playback until "REP 3" is displayed.
Each time you press (2) the display changes as
follows:
REP 1
(Track repeat)
Cancel (Normal CD/
MD playback mode)
Playing tracks in random
order

— Shuffle play

To play the tracks on the current
disc in random order
EN
Press (3) repeatedly during CD/MD
playback until "SHUF 1" is displayed.
To play all the discs in the changer
in random order
Press (3) repeatedly during CD/MD
playback until "SHUF 2" is displayed.
To play all the discs in the current
connected changers in random
order
Press (3) repeatedly during CD/MD
playback until "SHUF 3" is displayed.
Each time you press (3) the display changes as
follows:
SHUF 1
(Disc shuffle)
Cancel (Normal CD/
MD playback mode)
If you press (1) during shuffle play, the first 10
seconds of all tracks will be played in random
order.
12
REP 2
(Disc repeat)
REP 3
(Changer repeat)
SHUF 2
(Changer shuffle)
SHUF 3
(All shuffle)

Labeling a CD

— Disc Memo

(CD changer with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name and select the specific tracks for
playback (page 13).
Note
When you label an MD, the disc names on the disc itself do
not change. The names are stored in the CD changer's
custom files.
1
Play the CD and press (FILE) for two
seconds.
CD
2
Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
CD
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
CD
If you press (SEL) when the eighth
character (farthest right character) is
flashing, the flashing part goes back to
the first character (farthest left
character).
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to the normal CD playback
mode, press (FILE) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.