Sync Button Function; Homeplug Av 200 Application Scenarios - Billion BIPAC 2071 User Manual

Sync Button Function:

There are 3 types of Sync Button trigger states:
1. Broadcast State: A BiPAC 2071 / 2072 device can provide information for
another BiPAC 2071 or 2072 device to join its powerline network group (works
even if it is currently the only device existing within the network group).
2. Join State: For an ungrouped BiPAC 2071 or 2072 device to join an existing
powerline network group.
3. Press the Sync Button on the first BiPAC 2071 / 2072 device to turn it to
Broadcast State. Then press the Sync Button of an ungrouped BiPAC 2071 /
2072 device to turn it to a Join State.
4. Ungroup State: Press the Sync Button for more than 10 seconds to separate the
device from its current attached network group.

HomePlug AV 200 Application Scenarios:

Scenario 1: A BiPAC 2071 / 2072 device A wants to form a network group
with another BiPAC 2071 / 2072 device B.
You can allocate whichever device (A or B) to be the Broadcast State and the Join
State.
Example:
1. Hold down the Sync Button of device A for 1~3 seconds to turn it into Broadcast
State.
2. Hold down the Sync Button of device B for 1~3 seconds to turn it into Join State.
3. Wait for the Sync LED of both devices to light up then you will now have both
devices being in the same network group.
Note: Once the device is plugged into the electric socket, connect it with an
Ethernet cable within 60 seconds to prevent the device from Auto Power Off.