Password Setup Procedure - Billion BIPAC 2071 User Manual

Homeplug av 200 ethernet adapter, homeplug av 200 ethernet bridge with ac pass through

Hide thumbs Also See for BIPAC 2071:

Table of Contents

Password Setup Procedure:

To assign a password to a specific device, select the device and click on the

Enter Password button at the bottom of the lower panel to call up the Set

Device Password dialog box.

Then type in the password in the blank provided and press OK.

Note: The Password field accepts the Device password in any case formats, with

or without dashed between them.

If the password entered is not recognized or unacceptable, an error message box

will pop up prompting user to change the password.

Table of Contents

Bipac 2072