Table of Contents
Advertisement
Playing the specific tracks only
You can select:
• BANK ON to play the tracks with "PLAY"
setting.
• BANK INV to play the tracks with "SKIP"
setting.
1
During playback, press (4).
"BANK" appears on the display.
BANK
CD1
B A N K O N
2
Press (4) to select the desired mode.
Each time you press (4) , the display
changes as follows:
z BANK ON
BANK OFF Z
Playback starts from the track following the
current one.
To go back to the normal playing mode, select
"BANK OFF" in step 2.
Actual total number:
Precautions
z BANK INV
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
Notes on Cassettes
Cassette care
Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tapes used for these cassettes are
very thin and tend to be stretched easily.
Frequent playing and stopping of these tapes
may cause them to be pulled into the cassette
deck mechanism.
Additional
Information
If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before switching on.
If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
If no sound comes from the speakers of a
2-speaker system, set the fader control to the
center position.
Do not touch the tape surface of a cassette, as
any dirt or dust will contaminate the heads.
Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
Do not expose cassettes to direct sunlight,
extremely cold temperatures or moisture.
When the tape is played back for a long
period, the cassette shell may become warm
because of the built-in power amplifier.
However, this is not a sign of a malfunction.
E
Sony XR-C400 (
) 3-810-309-11 (2)
EN
11
Advertisement
Table of Contents
