Fiap Control Active Manual page 6

FIAP Control Active
Connection and Operation
With the FIAP Control Active you control the comfort of your various devices in your patio garden.
Filters, pumps, lighting, ... has over sooner or later your garden a complete electrical installation. The
innovative FIAP Control Active is controlled with a remote control.
Remove the protection of the battery on the remote control. Close the FIAP Control Active in a installed
by a qualified electrician electrical outlet. Lift the blue cover and plug the connector of the product to be
operated in the socket of the FIAP Control Active. The device is ready for operation by remote control
and can OFF – ON switched.
Cleaning
Disconnect the power supply first, then secure the unit to prevent unintentional switching on. Use a
dry, soft cleaning cloth to clean the unit.
Disposal
Dispose of the unit in accordance with the national legal regulations. Ask your specialist dealer.
6
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. WEEE-Reg. Nr.: DE78152045
FIAP GmbH, Jakob Oswald Str. 16, 92289 Ursensollen
Tel: 09628 9213 0; Fax: 09628 9213 30; www.fiap.com