Table of Contents
Advertisement
RECOMMENDED METHOD - SECURE WITHOUT
DRAWER REMOVAL (FRAMELESS CABINETRY ONLY)
7
ROUTE HOSES & POWER CORD
Tie together to avoid kinking
1
8
ATTACH SIDE MOUNTING BRACKETS
Clip all four side mounting
brackets into their slots,
using a flat-bladed
'B'
screwdriver. Ensure they're
securely fitted before
sliding product into cavity.
'B'
'B'
'A'
'A'
'A'
The mounting slots are in pairs, one
on each side diagonally across the
product. 'A' bracket must match 'A'
.
OR
2
'A'
'A'
'A'
'B'
'B'
'B'
ALTERNATIVE METHOD -
SECURE BY DRAWER REMOVAL
7
ROUTE HOSES & POWER CORD & MOVE INTO CAVITY
.
Tie together to avoid kinking
4
Ensure hoses and cord
are not kinked or twisted.
8
REMOVE DRAWER
Mark the placement in
1
case the chassis moves.
Ensure the drawer
is removed and
then rotated
counter-clockwise
to prevent kinked
hoses.
2
OR
2
1
4
3
4
5
Advertisement
Table of Contents
