Troubleshooting & Solution; Caution - Sinclair SP-45A Manual

Troubleshooting & Solution
Malfunction Check point
Check if switch is on
Failure to
power on
Check if plug is loose
Check if front panel is
correctly installed
Unit operating
Check if PE bag was
sound very
removed
low and weak
air output
Check if air outlet is
blocked
Air outlet has
Check if there are objects
an odor
with odor placed near
unit's air inlet
Check if the filters need
to be replaced
Solution
Switch unit on
Correctly plug it to power source
Correctly install panel to unit
Remove the PE bag and install the
filters in correct order
Switch off unit and remove any
obstruction
Remove those odor-causing objects
Replace filters for the unit
Use voltage only at 230V 50Hz. Otherwise it may cause
fire hazard and risk of shock.
Do not improperly bend, pull, twist, tie the power cable or
place it near the high temperature. Damage of the cable
may cause fire and risk of shock.
Do not use put any heavy object on it or clip it.
If the cable or plug is broken and remains loose when
plugged into the socket, please do not use it.
Do not touch the plug with wet hands.
Please do not replace or change the cable. If broken,
please contact service hotline.
Please clean away any dust or dirt on the plug and cable
regularly.

Caution