Setting The Clock; Cassette Player; Listening To The Tape - Sony EXR-400 Primary Operating Instructions Manual

Setting the clock

The clock has a 12-hour digital indication.
For example, setting it to 10:08
1
Press (OFF) or (DSPL) during operation.
2
Press (DSPL) for two seconds.
100
The hour digit blinks.
1 Set the hour digits.
to go forward
to go back
1000
2 Press (SEL) momentarily.
1000
The minute digit blinks.
3 Set the minute digits.
to go forward
to go back
1008
3
Press (DSPL) momentarily.
1008
The clock activates.
Note
If the POWER SELECT switch on the bottom of the unit is
set to the B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio.
Actual total number:

Cassette Player

Listening to the tape

Insert the cassette.
Playback will start automatically.
If the cassette is already inserted, press (TAPE)
to start playback.
TAPE
The side facing up is being played.
TAPE
The side facing down is being played.
Tip
To change the tape transport direction, press (TAPE)
during tape playback.
To
Stop playback
Eject the cassette
Fast-winding the tape
During playback, press either side of
(PRESET/DISC).
PRESET
REW DISC
Rewind
To start playback during fast-forwarding or
rewinding, press (TAPE) .
E
Sony EXR-400 ( ) 3-810-306-11 (2)
EN
Press
(OFF)
6
FF
Fast-forward
5