Panasonic NE-SCV2N Operating Instructions Manual page 26

When to Call a Service Agent
If There Is Damage To The Oven
Contact a service agent immediately if you find damage to the supply cord, control panel, cavity, accessories,
or the door. It is best not to use the oven again until you have ascertained from the service agent that it is safe
to do so. Remember to give the service agent as much information as possible. (p.3)
If The Oven Is Not Working
If you find the oven is not working, follow these points before contacting a service agent.
Check:
1. The oven door is closed.
2. The required function(s) have been set correctly and the Start pad pressed. (pp.28–41)
3. The program lock has not been activated or deactivated against your requirements.
4. The oven is connected to a 20 amp outlet and the supply is operational. Try another power point, there
maybe a problem with the outlet or even a total power failure.
5. The oven is not connected to the electrical supply by means of an adaptor or extension cable.
6. The air vents are not blocked. If they are, unblock them, leave the oven for 15 minutes and then try again.
7. The "Troubleshooting" and "Common Queries" section on pp.47–48.
If the oven is still not operational, contact your service agent with all your details. (p.3)
50
SD Memory Card
Specified SD Memory Card
Set in the main unit when shipped from the factory.
O
When saving or deleting a cooking process, or when cooking according to a saved
O
program, be sure to set up and use the specified SD Memory Card.
SCV2N
If a card other than the specified SD Memory Card is set up, "U17" appears. (p.49)
RABN SU7FA029690
RP-SDFC51 MADE IN JAPAN
You can also save a cooking program data onto the specified SD Memory Card using your
O
personal computer. (pp.52–53)
Notes
• Be careful not to impart static electricity to the SD Memory Card while it is not set in the main unit.
• Do not dismantle or modify.
• Do not bend, drop, wet or subject the SD Memory Card to strong impacts.
• Do not touch the metal terminals with your hands or metal.
• Do not peel off the pasted labels. Also, do not paste new labels or stickers.
• Do not expose to direct sunlight or place in other hot locations.
• Do not place in humid or dusty locations.
• Do not place in locations where corrosive and other gases are generated.
• Always close the SD Memory Card cover except when inserting and taking out the card to prevent
contamination by water and dirt.
• If the SD Memory Card is lost or becomes faulty, please contact the dealer or a service agent to obtain a replacement. (p.3)
How to insert/remove
Before you insert / remove an SD Memory Card, always unplug the oven for personal safety.
O
Insert and remove the SD Memory Card with the display unit turned off.
Data may be destroyed when it is inserted or removed immediately after the power supply plug is inserted or
when the display unit is turned on.
QHow to remove
①
Remove the front cover
②
Turn the screw and open the SD
Memory Card cover by tools
SD Memory Card Cover Screw
③
Push in the SD Memory Card with your finger
Take out the SD Memory Card when it comes out.
QHow to insert
①
Insert the SD Memory Card all the
way inside
SCV2N
RABN SU7FA029690
RP-SDFC51 MADE IN JAPAN
②
Close the SD Memory Card cover and
tighten the screw by tools
SD Memory Card Cover Screw
③
Attach the front cover
Install the main unit Ⓐ into the groove of the drip tray.
Ⓐ
Groove
51