Panasonic NE-SCV2N Operating Instructions Manual page 14

How to Operate the Touch Screen
Tools
Check memory
Saved cooking contents, beep, and memory lock setting, etc. are displayed in order every
Memory list
4 seconds.
(In the case of two-digit display: 00–99)
To call up a particular memory number to confirm, see
O
below.
If you change the Turn back buzzer to ON (p.52), the
O
Turn back buzzer screen appears.
(Default setting: OFF)
Beep settings Memory lock Magnetron interval
(p.24) (p.27)
In order to call up a particular memory number to confirm, press the Stop/Reset pad while the display is
O
changing, then tap , enter the memory number, and tap
Change number
displayed by pressing the Start pad.
(e.g.: To call up memory number 52)
Memory cooking contents
(pp.36–37)
Maintenance interval
(p.46) (p.46)
Returns to the
O
initial screen.
. The memory contents are
OK
Continues to display
the contents of
subsequent memory
numbers.
26
SD Checksum
Use to confirm whether the contents of multiple SD Memory Cards are the same.
The memory contents in the SD Memory Card are displayed as four-figure alphanumeric characters.
If the alphanumeric characters are the same, the memory contents of those SD Memory Cards are the same.
Q To confirm the memory cooking data
Q To confirm the beep, memory lock data etc.
Memory lock
You can choose memory lock ON or OFF.
needs to be set every time.
O Memory lock
Press Start pad for
O
2 seconds (beeping),
and press Start pad
3 times (beeping).
Notes
Q When the memory lock is ON
O Memory cooking starts automatically after you select a memory number even without pressing the Start pad.
Memory cooking and Change settings are not displayed.
O
Q When the memory lock is OFF
Memory cooking starts when you press the Start pad after entering the memory number.
O
(e.g.: 3550)
Returns to the initial
O
screen after 3 seconds.
(e.g. ： 03C4)
Since the screen Returns to the initial
O O
changes quickly, screen after 3 seconds.
it is hardly
possible to catch
the above
screen.
(Default setting: OFF)
The oven returns to the
O
initial screen after
displaying the settings for
3 seconds.
Select ON or OFF , and tap
O OK
27
.