Panasonic NE-SCV2N Operating Instructions Manual page 13

How to Operate the Touch Screen
Tools
This feature cannot be used when memory lock is ON. Please cancel memory
O
Change settings
lock. (p.27)
Beep
Q To change the loudness of the beep
O
Q To change the length of beep at the end of program
Q To change the tone pitch of the beep at the end of program
Q To select ON or OFF for the preheated beep (Default setting: ON)
Q To select ON or OFF for the door alarm (Default setting: ON)
O
（Default setting: Level3）
Depending on the
Select the loudness with
O
setting,
tap .
OK
Pitch of beep clean
may be displayed.
(Default setting: Type1)
Beeps in three short pulses
every 15 seconds
Beeps in longer pulses
continuously
Beeps in one long pulse then
beeps in three longer pulses
every 30 seconds
The beep stops when you
O
open the door.
Select the length of beep and tap
O
(Default setting: Normal)
Select the tone pitch and tap
O
Select
O
Select
O
Preheated beep
OFF
or Door alarm .
OK
The oven returns to the initial screen after displaying the settings for 3 seconds.
24
Preheat temperature
+ or – , and
.
OK
LCD brightness
.
OK
ON or
, and tap
.
You can change the preheat temperature displayed on the initial screen.
[Default setting: Preheat 1 → 525°F (280°C), Preheat 2 → 475°F (250°C)]
Please note that the preheat temperature previously saved for the memory
O
cooking (p.36) will also be changed if you change the setting here.
Select Preheat1
O
or Preheat2 .
Returns to the initial screen after 3 seconds.
O
You can choose the brightness of the touch screen.
(Default setting: Level3)
Bright
Dark
The oven returns to the initial screen after
O
displaying the settings for 3 seconds.
Select the brightness with
O
25
Set Required Set Cook available
O O
temp. From temp. From
350°F (180°C) to 350°F (180°C) to
525°F (280°C) in 525°F (280°C) in
25°F increments. 25°F increments.
+ or – , and tap OK .