Sony CDX-M7810 Operating Instructions Manual page 11

Setup y Display y Receive Mode
y Sound y Edit y List
3
Rotate the SEEK control dial until
desired setting item appears, then
press (ENTER).
The digital indication moves to the right
(setting selection) side.
4
Rotate the SEEK control dial to select
the setting, then press (ENTER).
The setting is complete.
5
Press (MENU).
The display returns to normal play/reception
mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In steps 2 and 3: press M or m instead of the SEEK
control dial; in step 4, press < or , instead of the
SEEK control dial.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
Setup
Clock Adjust (page 4)
Beep
To set "on" ( ) or "off."
z
AUX-A* 1 (AUX Audio)
To turn the AUX source display "on" (
(page 13).
Display
Clock (Clock Information)
To display the clock and the display items/image
at the same time.
– "on": to display at the same time.
– "off" ( ): to not display at the same time.
z
A.IMG (Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images.
– "off" ( ): to not change the image
z
automatically.
– "SA": to step repeatedly through the display
images of Spectrum analyzer.
– "Movie": to step repeatedly through the
display images of Movie mode.
– "All": to step repeatedly through the display
images in all display modes.
Info (Display Information)
To display the items (depending on the source,
etc.) at the middle of the display while a image
is displayed.
– "on" (
– "off": to not display any items.
Dimmer
To change the brightness of the display.
– "Auto" (
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Demo*
To set "on" (
A.Scroll (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– "on": to scroll.
– "off" (
Receive Mode
Local (Local seek mode)
– "on": to only tune into stations with stronger
signals.
– "off" (
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "on": to hear stereo broadcasts in monaural.
– "off" (
IF
– "Auto" (
reception frequency to eliminate noise.
– "Wide"*
broadcasts in stereo and with full the
frequency signal reception.
) or "off"
z
Sound
EQ7 Tune (page 9)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "off" (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
( ), "125Hz" or "78Hz."
z
Loudness
To enhance bass and treble at lower volume.
– "on": to reinforce bass and treble.
– "off" (
AUX Level
To adjust the volume level for each connected
auxiliary equipment (page 13). This setting
negates the need to adjust the volume level
between sources.
): to display the items.
z
): to dim the display automatically
z
1 (Demonstration)
) or "off" (page 4).
z
): to not scroll.
z
): to tune normal reception.
z
): to hear stereo broadcast in stereo.
z
): to narrow automatically the
z
2 : to always hear FM stereo
), "78Hz" or "125Hz."
z
): to not reinforce bass and treble.
z
continue to next page t
11