2
SETUP
–
Position the underride guard on both sides. Mount and tighten screws
–
Remove the seat. (
–
Store the tool set below the seat.
–
Mount the seat. (
–
Remove the remaining films.
–
Set kilometers or miles. (
–
Set the clock. (
–
Refuel. (
201920-10
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
p. 6)
p. 6)
p. 10)
p. 10)
p. 7)
5
.
5