Product Description; Specifications; Assembly - Shindaiwa 65001 Owner's And Operator's Manual

Product Description

Using the illustration as a guide, familiarize your-
self with your machine and its various compo-
nents. Understanding your machine helps ensure
top performance, long service life and safer
operation.
1 - Outer tube
2 - Gearcase
3 - Trimmer Head
4 - Cutting attachment shield
WARNING!
Do not make unauthorized
modifications or alterations to this unit
or its components.

Specifications

Length/Width/Height
Weight
Gearcase Lubrication
Gear Reduction
Gearcase Arbor Bolt Size
*Specifications are subject to change without notice.
Prior to Assembly
Before assembling, make sure you
have all the components required for a
complete unit:

Assembly

Installing a Tool Attachment
1. Place the Multipurpose Tool Carrier (A) and the Tool Assembly (B) on a clean,
flat surface so that both assemblies fit end to end. The powerhead assembly
should be facing up, and the tool assembly should be positioned with the lock-
ing hole in the tube (C) end facing up.
CAUTION!
Keep the open ends of the tubes clean and free of Debris!
2. Slip off the protective cover from the end of the tool, and loosen the coupler
screw knob (D).
3. Insert the tool assembly into the coupler (E), with the tool decal facing up, until
the line of the decal is flush with the end of the coupler. Twist the tool back and
forth until you are sure it snaps in place by the coupler latch (F).
4. When the two tube halves are locked together, press down on the spring-load-
ed latch protector (G) and tighten the coupler screw knob.
Multipurpose
Trimmer Tool
2
■
Outer Tube/Main Shaft Assembly
■
Cutting Attachment Shield
■
Trimmer Head
■
Assembly Tool (s)
Carefully inspect all components for
damage.
1
3
814 x 315 x 241 mm (32 x 12.4 x 11.8 in)
1.18 kg (2.6 lb)
Lithium based grease
1.286:1
7mm Left-hand thread
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
A
D
4
IMPORTANT!
G
F
C
M23004
B
E
5