Start Protection / Child Lock; Pause Or Stop Cooking; Stop Turntable - Hotpoint MWH 2734 B Operating Instructions Manual

stAnd-BY mOdE
The oven is in Stand-by mode when the clock is
displayed (or, if the clock has not been set, when the
display will show ":").

stArt PrOtECtiOn / CHiLd LOCK

This automatic safety function is activated one min-
ute after the oven has returned to "Stand-by mode".
When the safety function is active the door must
be opened and closed in order to start the cooking,
otherwise the display will show "door".

PAusE Or stOP COOKinG

To pause cooking:
The cooking can be paused to check, turn or stir the
food by opening the door. The setting will be main-
tained for 5 minutes.
To continue cooking:
Close the door and press the Jet Start button ONCE.
The cooking is resumed from where it was paused.
If you don't want to continue cooking you can:
Remove the food, close the door and press the Stop
button.
When the cooking is finished:
A beep will signal once a minute for 10 minutes when
the cooking is finished. Press the Stop button or
open the door to cancel the signal.
Add / stir / turn FOOd
i
Depending on the selected function, it could be
needed to add / stir / turn food during cooking. In
these cases the oven will pause cooking and it
will ask you to perform the needed action. When
required, you should:
1. Open the door.
2. Add / Stir / Turn the food (depending on the
required action).
3. Close the door and restart by pressing the
Jet Start button.
DOOR
• If the door is not opened within 2 minutes
since the request to Add food, the oven will
stop and it will go in Stand-by mode.
• If the door is not opened within 2 minutes since
the request to Stir or Turn the food, the oven will
continue the cooking process (in this case the
final results may not be the optimal ones).
CLOCK
To set the Clock of your appliance:
1. Press & hold the Auto Clean button for 3 sec-
onds.
ress the Plus/Minus buttons to set the
2. P
hours.
3. Press the OK/Jet Start. The minutes will start
blinking.
ress the Plus/Minus buttons to set the min-
4. P
utes.
5. Press the OK/Jet Start button.The clock is
set.
Note:
The first time the appliance is plugged in (or after a
power failure), the prodct will automatically enter the
Clock Setting mode; in this case, please follow the
above procedure starting from step No.2.
• If the clock has not been set after plug in,
the clock will shows "12:00".
• During the setting of the clock, if you press the
Stop button or if the setting is not completed after a
long time, the oven will exit from setting mode and
the setting will be invalid, display will shows ":".

stOP turntABLE

To get the best possible results with this particular
microwave, the Glass Turntable has to rotate while
cooking.
However, in case you need to use very large dishes
that could not turn freely in the oven, it is possible
to stop the rotation of the Glass Turntable using the
Stop Turntable function,
This function works only with the following cooking
functions:
- Forced Air
- Combi Grill (Microwave + Grill)
- Combi Air (Microwave + Forced Air)
hotpoint.co.uk
en
7 7