2
SETUP
–
Remove the seat. (
–
Activate lever
–
Remove locking caps
–
Mount the passenger seat. (
201908-10
–
Recharge the battery. (
–
Pull the fuse box out of the holder. Plug in connector
–
Store the tool set below the seat (except USA).
–
Fit the seat. (
201909-10
–
Remove screws
–
Mount the passenger footrests on both sides with the screws from the separate
enclosure.
Guideline
Screw, rear footrest bracket
–
Remove the remaining films.
–
Fill up with fuel. (
201910-10
–
Set the kilometers/miles SET KM/MILES. (
–
Set the clock with SET CLOCK. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Perform a fault memory query.
p. 7)
.
4
.
5
p. 7)
p. 8)
p. 7)
and the bushings on both sides.
7
p. 9)
p. 11)
. Mount the fuse box again.
6
M8
25 Nm
(18.4 lbf ft)
p. 10)
4