Garmin G5 Pilot's Manual page 16

3.3.4 Altimeter
The Altimeter displays 400 feet of barometric altitude values at a time on a rolling number gauge
using a moving tape. Numeric labels and major tick marks are shown at intervals of 100 feet.
Minor tick marks are at intervals of 20 feet. The current altitude is displayed in the black pointer.
The Selected Altitude is displayed above the Altimeter in the box indicated by a selection bug
symbol. A bug corresponding to this altitude is shown on the tape. If the Selected Altitude
exceeds the range shown on the tape, the bug appears at the corresponding edge of the tape.
Setting the selected altitude:
1) Press the Knob to display the Menu.
2) Select Altitude and use the Knob to change the Selected Altitude.
Syncing to the current altitude:
1) Press the Knob to display the Menu.
2) Select Altitude and press and hold the Knob to sync the Selected Altitude to the current
altitude.
Selected Altitude Bug
Barometric Setting
3.3.5 Barometric Pressure
The barometric pressure setting is displayed below the Altimeter in inches of mercury (in Hg).
Selecting the altimeter barometric pressure setting:
Turn the Knob to set the barometric pressure.
Garmin G5 Part 23 AML STC Pilot's Guide
Selected Altitude
Altimeter
Page 11 of 16
190-01112-12
Rev. 1