Transporting Your Generator - Redback RB4 5KVA Manual

Hide thumbs Also See for RB4 5KVA:
Table of Contents

Advertisement

2.
Using the screwdriver provided, loosen
arrester.
3.
Remove the spark arrester
4.
Check the spark arrester,
S.
Refit the spark arrester,
screws on the spark arrester.
6.
Refit
the
outlet cover plate, using
4
screws,
TRANSPORTING
WARNING!
When transporting you REDBACK Generator:
DO NOT overfill the petrol tank.
Ensure the fuel tap is in the 'off' position.
Ensure it is secured to prevent tipping over.
DO NOT operate whilst still on or in your vehicle. Remove from vehicle before use.
Use in a well-ventilated areas.
Avoid storing in direct sunlight.
DO NOT store in sealed area or at high temperatures. Doing so may lead to fuel
becoming volatile and may cause an explosion.
Avoid rough roads. If transporting on rough roads is necessary, drain the generator
before use.
Before storing you REDBACK Generator for long periods:
Ensure the
Ensure
you
1.
Drain all petrol into an approved fuel container. Open the fuel tap and
start the engine. Run until engine
2.
Disconnect the battery.
if
using
YOUR GENERATOR
storage
area is dry and clean.
have drained the fuel.
the
as
shown above.
necessary, clean or replace.
the
screwdriver provided tighten the 2
the
screwdriver provided tighten
shuts
7 screws
on
down.
the spark
the
22

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Redback RB4 5KVA

Table of Contents