To Connect The Soundbar To A Bluetooth Device - Samsung HW-J250 Manual

To connect the Soundbar to a Bluetooth device

▶
Check if the Bluetooth device supports the Bluetooth compliant
1. Press the ( ) button on the main unit's top
panel or press the Bluetooth
remote control to display the
The LED will blink indicating that the
●
Bluetooth device is not connected yet.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
stereo headset function.
Connect
button on the
Bluetooth device
icon LED.
3. Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
●
4. Select "[Samsung] Soundbar J-Series" from the
list.
If the Bluetooth device is successfully
●
connected to the Soundbar, then the
will stop blinking.
If the Bluetooth device has failed to pair with
●
the Soundbar, delete the previous " [Samsung]
Soundbar J-Series" found by the Bluetooth
device and have it search for the Soundbar
again.
5. Play music on the connected device.
●
●
LED
You can listen to the music playing on the
connected Bluetooth device over the
Soundbar.
In BT mode, the Play/Pause/Next/Prev
functions are not available. However, these
functions are available in Bluetooth devices
supporting AVRCP.
HW-J250
If asked for a PIN code when connecting a
●
Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired
●
at a time.
The Bluetooth connection will be terminated
●
when you turn the Soundbar off.
The Soundbar may not perform Bluetooth
●
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the Soundbar.
- If several Bluetooth devices are
simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off,
not in place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range as the
Bluetooth device, which can cause
electric interference.
The Soundbar supports SBC data
●
(44.1kHz, 48kHz).
Connect only to a Bluetooth device that
●
supports the A2DP (AV) function.
You cannot connect the Soundbar to a
●
Bluetooth device that supports only the HF
(Hands Free) function.
Once paired, if the Soundbar is in D.IN,
●
AUX, or USB mode, selecting "[ Samsung]
Soundbar J-Series" from the list on your
Bluetooth device will automatically change
the Soundbar's mode to BT.