Advertisement
Available languages
Available languages
Preparing MONSTER BOX™ for lifting by crane:
Preparing the MONSTER BOX for lifting by crane:
•
For SAFE rigging and lifting practices, refer to ASME B30 series; Safety Standard for Cableways, Cranes,
Derricks, Hoists, Hooks, Jacks, and Slings. (See www.asme.org).
•
Always inspect the lifting rings to ensure they are in proper working order and are not damaged or corroded.
Replace any damaged rings prior to rigging.
•
Secure doors or lids of box to prevent unwanted opening or spilling of contents.
•
Plan route of lifted box so that it does not pass over persons. Clear area of persons after box is connected and
tension is established.
•
LIFT ONLY by lifting lugs, DO NOT lift by handles, they are not designed to support heavy loads.
•
Rig for lifting using all (4) available lifting rings. The load rating is based on using all (4) lifting rings.
STEPS:
1. Ensure all internal items are secured and not allowed to shift
during transport.
2. Close lid and or secure all doors in a locked position prior to
lifting.
3. Cable tie, hook, or sling with straps along all (4) lifting lugs,
as shown.
4. Maintain all rigging practices in accordance with ASME B30.
See picture to right for typical rigging.
5. Ensure all lifting lugs are uninpinged and can align freely
towards the center of the unit.
6. Avoid any sudden jerks or rapid falls while moving the
MONSTER BOX by crane.
7. NEVER LIFT unit over persons; ALWAYS clear area before
moving MONSTER BOX by crane.
Recommended Load ratings:
Refer to Table 1 for allowable load rating of MONSTER BOX for
lifting by crane as well as recommended storage weight capacities
on shelving.
Table 1
Model 1000
Lift by
Not to exceed
crane
2500 lbs. (including
conainer weight)
Shelving
30 lbs./sq. ft.
Door Shelv-
N/A
ing
LIFTING INSTRUCTIONS
WARNING
Model 1010
Model 1020
Not to exceed
Not to exceed 2500
2500 lbs. (including
lbs. (including conainer
conainer weight)
weight)
N/A
30 lbs./sq. ft.
N/A
60 lbs. (each door, any
more may incur tipping
an empty container)
Refer to ASME B30
for proper rigging
DO NOT
Crane-lift by
handles
3
techniques
Advertisement
