Digoo DG-TH1180 Operating Instructions

Large Screen Thermometer Hygrometer
POWERING ON
Open the battery compartment cover. Insert batteries according to the correct polarity showed in the
compartment. The main unit needs 2 x AAA batteries, and the sensor needs 2 x AAA batteries.
After powering on, the clock will take about 3 minutes to connect with the outdoor transmitter. When
connecting, the signal symbol
TIME SETTING
At normal time displaying mode, hold pressing SET button till entering the time setting mode. The
figure will be flashing. Press
the digit will move faster. The setting order is 12/24 Hr
If there is no more operation for 30 seconds, it will save the existing setting and turn to normal
display or press SET button again to confirm the setting.
At normal time displaying mode, press SET button once to check the calendar.
ALARM SETTING AND SNOOZE FUNCTION
At normal time displaying mode, press
button once more to turn on the alarm function. There is an alarm symbol
At the alarm setting mode, hold pressing
button to adjust. Hold pressing
minute exit. If there is no more operation for 30 seconds, it will save the existing setting
and turn to normal display or press
The alarm sound will last for 2 minutes and it will change as below:
0-8 seconds： BI per second
9-19 seconds： BI BI per second
20-59 seconds： BI BI BI per second
>60 seconds： Keep BI
* When the alarm ring is on, press any other button to cancel the alarm sound. The alarm will be on
again after 24 hours.
* To turn off the alarm, press

OPERATING INSTRUCTIONS

Model: DG-TH1180
SET
Snooze
would be flashing on the screen.
or button to adjust the values. Hold pressing
or button, the digit will move faster. The setting order is hour
button again to confirm the setting.
button until the alarm symbol
MEM
hour
button once to check the setting alarm time. Press
button to set the alarm time. Press
or
minute year month
on the screen.
or
disappears on the screen.
button,
date exit.