Battery Removal - Remington R95 User Manual

,
Note: Please do not mix up the cutters and guards. If you mix them up
it may take weeks until the optimal shaver performance is restored.
7 Put the frame back onto the shaving unit and lock it by turning the
switch to the right (DIAGRAM K).
8 Place the shaving unit back onto the shaver.
, Note: If you clean the shaving unit with alcohol or another degreasing
agent you need to lubricate the guards with one drop of sewing
machine oil after cleaning. It helps to increase the lifespan of the
shaving heads.
,
Caution: Product is not washable or water resistant. Do not clean or
use under running water.
,

BATTERY REMOVAL

• The battery must be removed from the appliance before it is
scrapped.
,
DANGER: Once the shaver has been dismantled for disposal, do not
attempt to reassemble and/or use.
• Unplug the shaver.
• Run the shaver until the motor stops.
• Pull the head release button and remove the shaving unit from the
shaver (Diagram E).
• Using a small cross head screwdriver remove the screws on the
hairpocket (Diagram L).
• Pull or gently pry apart the shaver halves to expose the battery.
• Remove the front panel.
• Remove the 2 screws on the front panel (Diagram M).
• Cut the connection plate on both ends of the battery (Diagram N).
• Dispose of battery properly.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked
with this symbol must not be disposed of with unsorted municipal
waste, but recovered, reused or recycled.
ENGLISH
5