C Getting Started; Cleaning Cautions - Remington R95 User Manual

ENGLISH

C GETTING STARTED

• Ensure the appliance is turned off.
• Connect the shaver to the adapter and then to the mains.
• Ensure the shaver is switched off. Connect the shaver to the power
cord, then to the mains and charge for at least 24 hours when using
for the first time.
• The charging indicator light will glow steadily while charging. Your
shaver cannot be overcharged.
• Use product until the battery is low. You can use the shaver cordless
for up to 30 minutes.
• To preserve the life of your batteries, let them run out every 6 months
then recharge for 24 hours.
• When empty, the battery will be charged within 8 hours.
• The shaver can be attached to a mains voltage of 100V – 240V.
F INSTRUCTIONS FOR USE
, SHAVING
, Note: This shaver is for cordless use only.
1 Make sure your shaver is properly charged.
2 Switch the shaver on.
3 Stretch the skin with your free hand so the hairs stand upright
(Diagram C).
4 Only apply light pressure on the shaving head while shaving
(pressing too hard can damage the heads and make them vulnerable
to breakage).
5 Use short, circular strokes (Diagram B).
C CARE FOR YOUR SHAVER
Care for your product to ensure a long lasting performance. We
recommend you clean your shaver after each use. Using the brush
supplied clean the internal part of the head assembly and shaver body.
Always keep the protective cap on the shaving head when the shaver is
not in use.
,

CLEANING CAUTIONS

1 Ensure the appliance is switched off and unplugged from the mains
before cleaning.
2 Pull the head and remove the shaving unit from the shaver
(Diagram E).
3 Turn the switch on the frame to the left and lift the frame out of the
shaving unit (Diagram H).
4 Take the 2 shaving heads (cutters and guards) carefully out of the
shaving unit.
5 Clean the cutters and guards with the supplied brush. (Diagram I
and J)
6 Place the shaving heads back into the shaving unit.
4