Advertisement
3．Notice
Please pay attention to the sequence of the installation steps to avoid repeated disassembly.
Please note that there are two types of drawer and flip in the flat cable port of the transfer board.
The shape of all parts above in this description is only as a sign. There may be a difference
between the actual parts and the parts in the installation instructions. Please refer to the shape of
the actual parts purchased.
Before opening the supporting software, please connect the device to the computer first.
After connecting, the key indicator light is slowly flashing. And when the power switch is
switched on, the power indicator light will always bright. When the software is communicating
with the device, the communication indicator lights will flicker, and the lights are always bright
on the central switchboard C3.
If the motor or servo is not working properly, please check the connection and the power
supply first!
As described above,
center part, and also it should be able to slide smoothly in both directions. Please pay attention
to the position of the synchronous wheels on the stepper motors. If deviation happened in
motion or it is not running smoothly, please check the above parts and adjust to best conditions.
4. Update
Our software will be updated continuously.
Please visit our website:
If use the Laser Kit:
Warning:
Strictly forbidden for laser irradiation of the eyes!
Strictly forbidden for watching laser without wearing protective glasses!
Strictly prohibit the use of children!
please pay attention to the clearance between the pulley and the profile in
www.vigotec.cn
for more new products and software.
9/9
Powered by VigoTec 2019.
Advertisement
